After 6 long years I'm almost done with the rebuild. I put my steering together and gave it a quick left to right just to make sure everything was good, but no so good the servo isn't moving and it "springs back to the center" doesn't mater if it's left or right it springs back. Something to tight?
-
Ask questions. Share your HPI Savage knowledge. Register TODAY!
Steering
- Thread starter ikesavage
- Start date
-
- Tags
- steering servo
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Messages
- 2,627
- Location
- Dekalb, IL 60115
Not sure what you mean. Are you manually turning the tires with your hands then letting go to see them snap back?
I'd start by disconnecting the servo horn from the servo and make sure it still moves when the remote tells it to.
I'd start by disconnecting the servo horn from the servo and make sure it still moves when the remote tells it to.
Caretaker109
Well-Known Member
- Messages
- 330
- Location
- The Netherlands
I think you are turning the wheels by hand. If the servo arm isn't moving my guess is that you need to tighten the servo saver..
